Panasonic KX-TD816 Installation Manual page 91

2.4.4 Installing Expansion Unit
(KX-TD170 / KX-TD180)
7. Tie up all the cords into a bundle. If
other cords are coming from the upper
cabinets, tie them, too.
8. Close the cabinet cover and secure the
outside screw.
9. Cover the cords with the cord holder
(included).
10. Fix the cords to the wall at the
shown position so that the front
cover can be opened.
Notes • If two or three expansion units are
Cord holder
installed, cut the cabinet cover(s) on the
lower cabinet(s) to let the cords from
upper cabinet go down through the
cabinet cover(s). To guard the cords,
smooth the cut edge.
• If you attach the Caller ID Card, KX-
TD193 to the 4-CO Line Unit, KX-
TD180, attach it before installing the 4-
CO Line Unit to the main unit. For
installation, Refer to Section 2.4.7
"Caller ID Card Installation."
Installation
Cut here
2-59