Direct In Lines (Dil); Direct Inward System Access (Disa) - Panasonic KX-TD816 Installation Manual

D
D
irect In Lines (DIL)
Description
Conditions
Programming References
Feature References
Operation References
D
irect Inward System Access (DISA)*
Description
3-48 Features
Enables an incoming CO call to go directly to one or more
answering points.
DIL 1:1 puts an incoming CO call to a single destination.
Assignable destinations are: (1) extension; (2) modem*; (3)
external pager; (4) DISA* message. This CO line can be used by
multiple extension users to make calls but can be used by only one
extension to receive calls.
DIL 1:N puts an incoming CO call to multiple destinations.
Assignable destinations are extensions only. This CO line can be
used by multiple extension users to make and receive calls.
Both DIL 1:1 and 1:N can have different destinations for day and
night modes (Night Service).
• If a CO line is programmed for both DIL 1:1 and DIL 1:N, it is
regarded as a DIL 1:1 line.
• DIL 1:1 to the modem
administration. DIL 1:1 to an external pager sounds the pager when
receiving incoming calls (TAFAS feature). DIL 1:1 to DISA message
allows an external caller to access the system directly (DISA feature).*
Section 4, System Programming,
[407]–[408] DIL 1:1 Extension — Day / Night
[603]–[604] DIL 1:N Extension and Delayed Ringing — Day / Night
None
Not applicable.
Allows a CO caller to access specific system features as if the
caller is an extension in the system. The caller can have direct
access to features such as:
• Placing an intercom call to an extension, an operator, a
modem (for remote system administration) or an external
pager (for TAFAS).
• Calling an external party
For external calling, it is necessary to program either Non
Security or CO Line Security mode. In Non Security
3
*
allows the caller to perform remote
*: Available for KX-TD1232 only.
Features