Manager Extension; Message Waiting - Panasonic KX-TD816 Installation Manual

M
M
anager Extension
Description
Conditions
Programming References
Feature References
Operation References
M
essage Waiting
Description
Conditions
Programming References
3-82 Features
One extension in the system can be assigned as the system
manager. This extension can perform System Programming.
• Besides the manager extension, the extension that is connected to the
jack 1 is able to perform System Programming.
• If eXtra Device Port mode is enabled at the manager extension, the
proprietary telephone user is regarded as the manager.
Section 4, System Programming,
[006] Operator / Manager Extension Assignment
None
Not applicable.
The system supports the ability to inform the called party of a
message waiting. The user, with a MESSAGE button, knows there
is a message if the LED of the MESSAGE button is lit red. If the
button is not provided nor assigned, the called party hears special
dial tone, when he / she goes off-hook. Pressing the lit MESSAGE
button also means to call back the called party or listen to the
messages which are stored in the mailbox of the Voice Processing
System.
• For the proprietary telephone which is provided with no MESSAGE
button, a flexible CO button can be assigned as the MESSAGE button
either by System or Station Programming.
• Cancelling the message can be performed from the extension setting it
or from the extension receiving it.
• The system supports a maximum of 128 simultaneous messages.
• Messages are always left on the original extension. It is not sent to a
Call Forwarding or Station Hunting destination.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Message waiting set / cancel / callback
Station Programming.......................................................User Manual,
Flexible Button Assignment – Message Waiting (MESSAGE) Button
3 Features