Host Pbx Access Codes - Panasonic KX-TD1232 Program Manual

General Programming

[411] Host PBX Access Codes

Description
Assigns Host PBX or Centrex access codes. If the system is installed behind a host PBX or a
Centrex system, an access code is required to make an outside / Centrex call or to access
Centrex features. Up to four codes can be stored for an outside line group assigned to the line.
Selection
• Outside line group (TRG) number:
1 through 8,
( =all outside line groups)
• Access code:
1 or 2 digits, four different entries (max.)
Default
All outside line groups — Not stored
Programming
1.
Enter 411.
Display: 411 HOST PBX #'S
2.
Press NEXT.
Display: TRK GRP NO?
3. Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1: , , ,
4.
Enter an access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new access code.
Display example: TRG1:01, , ,
5.
To enter more access codes for the same outside line group, press
codes until all the required entries are completed.
Display example: TRG1:01,08,10,22
6.
Press STORE.
7.
To program another outside line group, press NEXT or PREV, or SELECT and the desired
outside line group number.
8. Repeat steps 4 through 7.
9. Press END.
186
and enter the access
Programming Guide