Panasonic KX-TD816 Installation Manual page 65

2.2.3 Wall Mounting
KX-TD1232
Mounting on Wooden Wall
1. Place the templet (included) on the wall
to mark the four screw positions.
Templet
2. Install the four screws (included) into the
wall.
Drive the screw
to this position
3. Hook the main unit on the screw heads.
Wooden
Wall
Mounting on Concrete or Mortar
Wall
1. Place the templet (included) on the wall
to mark the four screw positions.
2. Drill four holes and drive the anchor
plugs (included) with a hammer, flush to
the wall.
To the wall surface
Anchor Plug
3. Install the four screws (included) into the
anchor plugs.
Drive the screw
to this position
4. Hook the main unit on the screw heads.
Concrete Wall
6.4 mm
(1/4 inch)
29 mm
(1 1/8 inch)
Installation 2-9