Panasonic KX-TD816 Installation Manual page 94

2.4.7 Caller ID Card Installation*
(1) Installing to the Initial CO Line Card
KX-TD816
2-62 Installation
A maximum of two Caller ID Cards (KX-TD193) can be installed
to the KX-TD816, and a maximum of three Caller ID Cards can be
installed to the KX-TD1232. The Caller ID Cards can be installed
to the initially provided CO Line Card and/or to an optional 4-CO
Line Unit (KX-TD180), as required.
The CO Line Card of KX-TD816 can attach one Caller ID Card,
and the CO Line Card of KX-TD1232 can attach two Caller ID
Cards. 4-CO Line Unit can attach one Caller ID Card.
1. Loosen four screws to open the inside cover of the main unit.
Note If any cards, units, or cords are installed to the main unit, remove
them beforehand.
2. Attach the Caller ID Card to the CO Line Card, fitting the
connectors.
One card can be installed to the initial CO Line Card.
Inside cover
3. Put the inside cover back on the main unit and secure the
screws.
CO Line Card
KX-TD193
*: Available for KX-TD816C/1232C and
KX-TD816HK/1232HK only
CALLER ID
Caller ID Card