001
Description
Selection
Default
Programming
Conditions
4-16
System Programming
4.2
System Speed Dialing Number Set
Used to program the System Speed Dial numbers. These numbers
are available to all extension users. There are 100 numbers from 00
through 99.
• Speed dial number: 00 through 99
• Telephone number: 24 digits (max.)
All speed dial numbers – Not stored
1.
Enter 001.
Display: SPD Number Set
2.
Press NEXT.
Display: SPD Code?–>
3.
Enter a speed dial number.
To enter speed dial number 00, you can also press NEXT.
Display example: 00: Not Stored
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another speed dial number, press NEXT or
PREV, or SELECT and the desired speed dial number.
7.
Repeat steps 4 through 6.
8.
Press END.
• There is a maximum of 100 speed dial numbers. Each speed dial
number has a maximum of 24 digits. The valid characters are 0
through 9,
, and # keys, FLASH, PAUSE, SECRET and –
(hyphen) buttons.
– To store the flash signal, press FLASH.
Note: The stored flash will be in effect only during an
established call. (Refer to Section 3 "External Feature
Access.")
– To store a hyphen, press the "–" button.
Manager Programming