First Digit Time - Panasonic KX-TD816 Installation Manual

4.4 Timer Programming
Description
Selection
Default
Programming
Conditions
Feature References

First Digit Time

Sets the maximum time allowed between the start of CO dial tone
and the first digit dialed on an outgoing CO call. If an extension
user fails to dial any digits during this time, the DTMF receiver is
released.
Time (seconds): 5 through 120
10 s
1. Enter 207.
Display: 1st Digit Time
2. Press NEXT.
Display example: Time: 10
3. Enter the time.
To change the current entry, press CLEAR and the new time.
4. Press STORE.
5. Press END.
• This timer is used for toll restriction checking.
• You cannot leave the entry empty.
Section 3, Features,
Toll Restriction
sec
System Programming
207
4-57