Pause Insertion, Automatic - Panasonic KX-TD816 Installation Manual

P
Connection References
Programming References
Feature References
Operation References
—User Manual
P
ause Insertion, Automatic
Description
Conditions
3-94 Features
user goes on-hook, the other user continues the call.
• When receiving a call;
The SLT is enabled; Both the PT and the SLT ring except when the PT
is in Handsfree Answerback mode or Voice Alerting mode.
The SLT is disabled; PT rings but the SLT does not ring. However, the
SLT can answer the phone.
• When the SLT is in operation, the display and LED indicator on the
paired PT will show in the same way as if the PT is in operation.
• If APT + SLT are used, the extension user cannot originate a call from
the SLT if the APT is:
– playing BGM
– in programming mode
– receiving a paging announcement over the built-in speaker.
• If eXtra Device Port feature is available, a DPT+ SLT can act as
completely different extensions.
• Call Waiting tone can be heard only by PT.
Section 2, Installation,
2.3.5 Paralleled Telephone Connection
Section 4, System Programming,
[100] Flexible Numbering, Parallel telephone mode set / cancel
Section 3, Features,
EXtra Device Port (XDP)
DPT Features, SLT Features;
Paralleled Telephone Connection
This function is used to insert a pre-assigned pause between the
CO line access number, the host PBX, Centrex or carrier access
code and the successively dialed digits.
• This feature requires previous programming of CO line access number,
host PBX, Centrex and special carrier access codes as well as
assignment of the pause duration.
• This feature works for Speed Dialing, One-Touch Dialing, Last
Number Redial, Saved Number Redial, Pickup Dialing, Call
Forwarding – to CO Line as well as for ordinary calls.
• Pressing the PAUSE button in dialing number inserts a pause for a
pre-assigned time.
3 Features