Class Of Service - Panasonic KX-TD816 Installation Manual

601
Description
Selection
Default
Programming
Conditions
Feature References
4-102 System Programming
4.8 Extension Programming

Class of Service

Programs each extension for a Class of Service (COS). The COS
determines the call handling abilities of each extension.
• Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jacks, -1 = first part, -2 = second part)
• COS number: 1 through 8
All jacks-1/2 – COS 1
1. Enter 601.
Display: COS Assign
2. Press NEXT.
Display: Jack NO?–>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #01-1:COS1
4. Enter a COS number.
To change the current entry, enter the new number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of eight Classes of Service. Every extension
must be assigned to a Class of Service and is subject to the COS
Programming of programs [500] through [508] and [991].
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
• To assign all jacks to one COS, press the
case, the display shows the contents programmed for Jack 01.
*• Program [811] "DISA User Codes" is also used to assign a Class of
Service to a DISA User Code.
Section 3, Features,
Class of Service (COS)
(-1 / -2),
(-1 / -2),
key at step 3. In this
: Available for KX-TD1232 only.
*