Busy Lamp Field; Busy Station Signaling (Bss) - Panasonic KX-TD816 Installation Manual

Features
B
Busy Lamp Field
Description
The LED (Light Emitting Diode) indicators of the DSS (Direct
Station Selection) buttons, each of which corresponds to a selected
extension. tell whether the corresponding extensions are idle or
busy.
Conditions
l
This function is available for DSS buttons on DSS Consoles and for
tlexible CO buttons assigned as DSS buttons on proprietary telephones.
l
A DSS button indicator lights red if the corresponding extension is
busy.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User
Manual.
Flexible Button Assignment - Direct Station Selection (DSS) Button
Feature References
Section 3, Features,
Button. Direct Station
Selection (DSS)
DSS Console (KX-T7240/
KX-T7040)
Operation Refe;. rices
Not
applicable.
Busy Station Signaling (BSS)
Description
When attempting to call a busy extension, Busy Station Signaling
allows you to signal the user on the phone to answer your call.
Thecalled extension user hears a Call Waiting tone and is able to
answer the call.
Conditions
l
This feature is effective if the called extension has enabled Call
Waiting. If Call Waiting is enabled, the caller will hear ringback tone;
if not, the caller will hear reorder tone.
* If the called party is provided with Off-Hook Call Announcement
(OHCA) function, the caller can announce the call through the speaker.
Programming References
No
programming required.
Features
3-13