Underwater Lighting - Regal 53 SC Owner's Manual

Auxiliary Equipment Operation

UNDERWATER LIGHTING

OVERVIEW
The underwater light option provides high output, long
life and low heat emission. The lights are made from a
high impact resistant polycarbonate housing. The lights
are installed under the transom for maximum effi ciency.
Their beam is blue for increased underwater penetration.
OPERATION
The underwater lights are energized through the dash
underwater light switch or on the stairway switch panel.
Remember that which ever switch is used to turn on the lights must
be used to turn the lights off since there is no 3 way switch technol-
LED Underwater Light
ogy used.
They feature the latest LED (light emitting diode) technol-
ogy which eliminates the fi lament found in older lighting
products and therefore is more adaptable to the harsh
marine environment along with not being affected by vibra-
tion. The LED circuit is solid state and does not contain
any mercury so it is environmentally friendly. Furthermore,
the life span of the LED unit is normally much longer
over other light types.
Note that the underwater lights feature the ability to show
a solid light stream, can be set to strobe or can assume a
vendor set automatic fade or (dim) position.
1. To use the normal solid light stream turn the switch to
the "on" position.
2. To strobe the lights, quickly press the switch to the off
and on position.
3. To enter the fade (dim) automatic position. quickly press
the switch again to the off and on position.
Note that what ever position the lights were left in will be
assumed when the light switch is later reactivated.
81