Regal 53 SC Owner's Manual page 198

GMI™ 20 DISPLAY
This Garmin dash display communicates with NMEA
2000 sensors and devices. The unit can display speed,
water depth, heading, and fuel data when connected to
the proper sensors. Note that select functions may not be
available due to missing the sensors.
The unit uses profi les made up of instrument pages that
display like information including engine and fuel data.
During set-up, you can select one of four preset default
profi les including powerboat, sailboat, fi shing, or engine/
fuel or you can set up a custom profi le (3 empty profi les).
Below is the basic button function information. For fur-
ther data, refer to the Garmin GMI 20 owner's manual lo-
cated in the owner's information packet or use the on-line
Goggle search agent from your computer or smartphone.
Engine & Controls
VESSELVIEW
VesselView is the primary source of information for the
Zeus propulsion unit. This unit is universally compatible
with a variety of Mercury Marine products. Since the dis-
play unit functions for several different propulsion pack-
ages some functions may not be available.
VesselView recognizes twin diesel applications such as
your Cummins package. Dual displays are helm mounted
and each propulsion package features its own display unit.
It constantly reports and monitors basic operating infor-
mation depth, seawater temperature, trim status, steering
angle, vessel speed, and the status of the fuel tank levels.
VesselView can be fully encapsulated into the vessel's
global positioning system (GPS) or the NMEA 2000 sys-
tem for updated speed, navigation, and fuel-to-destina-
tion data.
VesselView is a display extension for joystick and auto pi-
lot operations. The functioning of these piloting features
are controlled through the Mercury Marine audio pilot
control area network (CAN pad). VesselView will exhibit
if a mode of control is active or in stand-by; pop-ups will
appear as the vessel arrives at a way-point asking to ac-
knowledge the turn, or indicate by text how to adjust the
engine and drives to achieve maximum effi ciency.
VesselView is equipped with a mico SD card which is
loaded at the factory with a personalized default confi gu-
ration which permits the selecting of various information
cells.
On the next pages is a brief introduction to the Vessel-
View display unit. Refer to the VesselView owner's manu-
al in the owner's information for detailed set-up and dis-
play operational instructions. For additional sourcing use
an internet search agent.
9