Regal 53 SC Owner's Manual page 199

A B
A=Pages Button
B=Left Arrow Button
C=Right Arrow Button
D=Enter Button
Basic Button information:
When you press the pages button it will activate the scroll
bar menu. If the pages button is pressed again you exit
the scroll bar menu.
When you use the right and left arrow buttons you navi-
gate (highlight) through the contextual information pa-
rameter segment.
To enter an icon or function area, press the enter button
when the correct icon is highlighted.
D
C
10
Screen Display Locations/Descriptions
Use the drawing above to compare with the actual display
on the left. The boundary boxes above in real time dis-
play specifi c engine information and only active modes.
A basic description of each box will be outlined below.
Refer to the VesselView operator's manual for further in-
formation.
1. Volts or Depth: This data box can be set by the user
A list of available data parameters can be modifi ed in the
settings menu. If your vessel utilizes the depth/fi sh fi nd-
er option the transducer permits you to read depth data.
Without the depth/fi sh fi nder option, volts will replace
the depth information.
2. Fuel: This data box displays total fuel remaining on
board from the master stateroom installed fuel tank. This
data box can be set by the user. A list of available data
parameters can be modifi ed in the settings menu.
3. Steering Angle: This data box when programmed
in the settings menu reads the "Zeus" drive steering an-
gle.
Chapter 5