Regal 53 SC Owner's Manual page 322

Auxiliary Equipment Operation
Initializing-
To operate the Seakeeper start the 15 KW upgraded gen-
erator and let it run for a few minutes. Remember that
the generator is the source of power while at sea. Refer to
chapter 4 for generator information. The stabilizer circuit
breaker found on the 240 volt side of the ship's AC panel
needs to be energized. Next, there is a circuit breaker on
the 12 volt (DC) side of the ship's panel marked stabilizer
that needs to be activated. Power will now be available to
the helm mounted display panel. At this point the Sea-
keeper can be powered up.
Read the following pages for an introduction to initial-
izing the gyro. For more detailed information refer to the
Seakeeper Operation Manual. Read and understand all
safety warnings before attempting to operate the device.
61