Regal 53 SC Owner's Manual page 370

WINDSHIELD WINDOW FILM
Your yacht front windshield features a protective coating
that shields against infrared and ultraviolet radiation which
results in a cooler cockpit.
During the curing process of the 7 protective fi lm layers
you may notice changes in the optical clarity which results
in a cloudy appearance. If this happens, it is normal and
will go away. After the moisture dries, the hazy appearance
will disappear as the fi lm bonds to the glass. Note that with
a newer boat in a cooler climate the drying time may be
accentuated. Average drying or curing time is 45-60 days
after initial installation.
Cleaning instructions for treated windows;
1. Use a clean, soft towel, cloth or synthetic sponge.
2. Do not use solutions that contain abrasive materials.
WHISPER WALL CEILING COVERING
Your yacht features a "whisper wall" ceiling product. It is
manufactured with solution dyed polyolefi n and polyster
staple fi bers which resist stains, moisture, mildew and
bacteria.
If a liquid should stain whisper wall clean the area
immediately with a dry, white absorbent cloth or paper
towel. Avoid scrubbing the area. This may spread the liquid
stain or distort pile.
For solids, allow drying, remove with cloth, gently brush
and vacuum the area.
Note that most stains will disappear when treated with a
mild detergent. To prevent spreading, work from the edges
of the stain to the center. After the stain has been removed,
rinse with a mist sprayer of cold water and blot until dry.
If you elect to use a cleaning solvent or spot removal agent,
test in an inconspicuous area to make certain the solution
does not alter color or damage fi ber and blot dry.
24
Chapter 8
WHISPER WALL