Regal 53 SC Owner's Manual page 165

Table of Contents

Advertisement

Salon Entertainment System Components &
Function
Acoustimass® Module-
the module. There is a bass knob located at the rear of
the module that permits the system base level to be con-
fi gured. Normally the knob is set to the middle position.
Turn the knob counterclockwise to decrease the base
level. Turn the knob clockwise to increase the base level.
TV Antenna Switch
Inside the salon entertainment
locker is a switch mounted on the
aft vertical wall. This TV antenna
switch/amplifi er operates as fol-
lows:
Shoreside- When the switch is
turned as far left as possible (coun-
terclockwise) it is in the shoreside
position.
At this point the television signal is ready providing the
coaxial cable is plugged into the power inlet and the ma-
rina dock box.
At Sea- Turn the switch clockwise to activate the sea/am-
plifi er portion of the switch. As the switch is positioned
clockwise it is permitting you to monitor the antenna
gain, expressed in DB's. It is adjusting the signal power
in order to optimize TV sea reception. It amplifi es the
weaker signals and drams the stronger ones.
When cruising you may encounter a marina without a
working shore signal so your backup is to use the ship's
antenna. This is more common with older marinas lo-
cated away from the more traveled waterways.
This module controls
the speaker system vol-
ume. It is located in the
salon under the stair-
way storage cabinet
where it is the properly
located from the TV to
prevent any interfer-
ence. Do not relocate
113
Fusion AM-FM Stereo-
The salon entertainment center features a Fusion AM-
FM stereo that can be controlled by the Bose® master
remote. The Bose speakers distribute the stereo sound.
Turn on the stereo. Press the TV button on the remote.
Note that the salon TV must be OFF to receive the
Fusion audio signal.
ON BUTTON
FUSION STEREO
iPOD-INSIDE FUSION COVER
iPOD
Note that under the stereo cover is an iPOD dock which
permits music to be played through the salon Bose speak-
er system.
Simply fi nd the compatible Apple holder and insert with
the device into the Fusion dock. Note that a compatible
iPHONE or iPad can be connected to the dock. Close
the control door fi rmly. Choose auxiliary. Select the audio
source ie; iPOD, MTP device or USB.
Note: if you select one of the sources without fi rst connecting the
device, the message "Not connected" is displayed on the screen.
Systems

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents