Regal 53 SC Owner's Manual page 200

4. RPM (revolutions per minute): This data bar fea-
tures twin moving bars which displays individual engine
rpm.
5. Speed: This data box displays the speed number, GPS
as the speed source along with the unit of measurement
(mph is the default).
6. Gear Position: This data box displays the gear posi-
tion for individual engines. The defi ned gear positions are
"F" for forward, "N" for neutral and "R" for reverse.
7. Trim: This data box is user defi nable by modifying the
list of applicable parameters in the Settings menu. Note
that a trim pop-up is available in the contextual data area
of the screen. You can turn the pop-up on or off in the
Settings area.
8. Tabs: This data box is user defi nable by modifying the
available information parameters found in the Settings
menu. The port tab will be displayed on the left side of
the trim data. Starboard tab will be displayed on the right
side of the trim data.
9. Scroll Bar Icon: An icon represents the current data
shown in the contextual data area of the screen. By press-
ing the pages button the scroll bar opens. You can select
an icon in the scroll bar and the contextual data will be
displayed.
10. System Tray: This data box displays the current ac-
tive and any warnings.
11. Contextual Data Area: This box displays all contex-
tual data which may include all warnings, maintenance
schedules, messages and the initial start up scan process.
NOTICE
TO CLEAN DISPLAY SCREEN USE THE
PACKAGED CLOTH AND FRESH WATER.
MOISTEN THE CLOTH WITH FRESH WATER
TO REMOVE ANY SALT BUILD-UP!
Engine & Controls
NOTICE
WHEN THE DISPLAYS ARE NOT IN USE,
INSTALL THE SUN COVERS. THIS WILL
PREVENT UV DAMAGE TO THE SCREEN AND
THE RUBBER BUTTON KEYS.
Refer to the VesselView owner's manual for expanded
information on system startup, contextual data, setup and
calibrations, along with screen navigation.
11