Dts Control - Regal 53 SC Owner's Manual

The Cummins engine and Zeus propulsion system features MerCruiser "Smartcraft" technology which assures effort-
less, smooth shifting along with immediate throttle response and several alternate operational modes for the
(ERC) electronic remote control levers.
Below is an introduction to select remote control functions. Read and understand the remote control operation before attempting
to operate your vessel. Practice in a controlled environment before attempting any close tracking docking and maneuvering. Always train
another crew member on operation principles should the operator become disabled. Understand the movement of
each control handle and how it effects movement of the vessel.
Refer to the control box on the opposite side of this spread for basic function location and description. Read the
"Zeus" operation manual for further detailed information.
ITEM CONTROL
A "Neutral lights"
B "+"
C
"-"
D "Syn"
E "1 Lever"
F "Throttle only"
G "Dock"
H "Transfer"
DTS CONTROL FUNCTION DESCRIPTION
Light up when transmission is in neutral position. Lights fl ash when engine is in
the throttle only position.
Increases brightness settings for CAN pad, Vesselview and Smartcraft displays.
Decreases brightness settings for CAN pad, Vesselview and Smartcraft displays.
This turns the auto-synchronization feature off or on which keeps the throttle
handles within 10% of each other and permits equal rpm for each engine.
This mode permits shift and throttle positions of both engines to be controlled
by the port lever.
Permits the vessel operator to increase engine warm-up rpm's without having to
engage the transmissions into gear.
Available to use with both joystick and control levers.
Joystick operation reduces throttle capacity to est.70% of normal joy stick thro
This mode reduces the control throttle limits to about 50% of full throttle.
2nd helm connection feature- not used on the Regal 53 SC.
Engine & Controls
FUNCTION
13