Bilge Pump/Float Switch - Regal 53 SC Owner's Manual

BILGE PUMP/FLOAT SWITCH

Output
Hose
Bilge Pump
Your yacht features bilge pumps and fl oat switches in
the sump (bilge), salon, and forward stateroom entrance.
The middle and forward bilge pumps use automatic fl oat
switches and energize as needed.
The aft bilge pump features a helm switch with a manual
override or in most cases uses the "automatic" position.
In this "auto" position if the boat takes on water, the bilge
pump will activate and pump excess water overboard. The
center switch icon lights up when activated to alert the
operator of aft bilge pumping activity. When this occurs
the bilge compartment should be checked immediately to
fi nd the reason for pump activity.
Periodically check the grates of all pumps and automatic
switches for debris and spray the units down with water.
Make sure a steady stream of water exits through the hull
fi tting indicating the entire output hose system from the
bilge pump itself is debris free.
In some cases the bilge pump can be lifted out of the
grate casing by releasing the 2 tabs allowing any debris to
be fl ushed out easier.
Auxiliary Equipment Operation
Grates
Automatic Float Switch
29