Regal 53 SC Owner's Manual page 89

POSSIBLE PROBLEMS/SOLUTIONS
1. It is possible that one of the battery
management system breakers may trip
from long-term arcing and heat. The
breaker may need to be reset- This
might happen occasionally with one of
the battery charger breakers. To trip and
reset this style of breaker do the following:
2. Breaker will not reset- Replace the breaker. Contact
the nearest Regal yacht dealer for replacement parts.
3. Breaker continues to "trip". Check the affected
equipment to determine if it is responsible for the exces-
sive draw to trip the breaker. If the equipment is deter-
mined to be within specifi cations check for a "short" in
the wiring circuit. Also, the breaker may be faulty. Con-
tact the nearest Regal yacht dealer.
A. Take a small slotted screw-
driver from your on-board tool
kit and insert it in the breaker
slot until it trips. You will hear
a snapping type noise. See the
illustration.
B. Notice that the breaker has
pushed outward from its origi-
nal fl ush position indicating the
breaker has been tripped. See
the illustration.
C. To reset the breaker use
your fi nger to press the breaker
down until it locks in the "on"
position. You may hear a slight
noise. This is normal. The icon
light should be lighted after this
procedure. See the illustration.
37
Systems