Caller Id Display - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL

1.18 CALLER ID DISPLAY

The station user can change the order in which the CLI, Caller ID and/or ANI
information is displayed on an LCD set.
CLI display options are the following:
0. NO DISPLAY
1. NUMBER FIRST
2. NAME FIRST
Caller ID display options are the following:
0. NO DISPLAY
1. NUMBER FIRST
2. NAME FIRST
ANI display options are the following:
0. NO DISPLAY
1. NUMBER FIRST
2. NAME FIRST
ACTION
1. Press the transfer key followed by 119
Display shows
No CLI data will be displayed.
The CLI number received from the Central Office will be
displayed first.
The CLI name received from the Central Office will be
displayed first.
No CID data will be displayed.
The CID number received from the Central Office will be
displayed first.
The CID name received from the Central Office will be
displayed first.
No ANI data will be displayed.
The ANI number received from the Central Office will be
displayed first.
Since there is no name sent by the Central Office, The only
time you will receive a name is when your service company
has programmed a name to be associated with the number
otherwise your display will read "no ANI name".
1.25
Home Page
USER INSTRUCTIONS
PART 1 SEPTEMBER 2005
DISPLAY
[201] CID DISP
NUMBER FIRST
Table of Contents