Mmc: 608 Assign Clip Review Block - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 608
3 3
DCS
Provides a means of adding or deleting CLIP review blocks (or 'bins') to an individual keyset.
With the ability to delete a block (or blocks), it will not be necessary to waste these on such items
as voice mail and DPIMs, or on keysets that do not have displays. The FREE value displayed
shows how many blocks are left to be assigned. The system automatically assigns 1 block of 10
numbers to each keyset. Each keyset may be assigned a maximum of 5 blocks (50 numbers).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 608
Display shows
2. Dial station number (e.g., 205)
OR
Use UP and DOWN to select station and press RIGHT
soft key to move cursor
3. Enter number of entries (e.g., 50)
OR
Press UP or DOWN to select
OR
Press HOLD key to delete bin(s)
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ASSIGN CLIP REVIEW
BLOCK
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
One block of 10 entries
None
MMC 608 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[201] REVIEW BLK
10 : 0180 FREE
[205] REVIEW BLK
10 : 0180 FREE
[205] REVIEW BLK
50 : 0140 FREE
MMC PROGRAMS
NOVEMBER 2001
3 3 7 7
408