Customer On/Off Per Station - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC:300
DESCRIPTION:
Allows the following features to be enabled on a per–station basis.
ACCESS DIAL
MICROPHONE
OFF–HOOK RING
SMDR PRINT
TGR ADV.TONE
VMAA FORWARD
STN CALL PRT
FWD DLY USE
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1.

CUSTOMER ON/OFF PER STATION

Determines whether a user can select a trunk or trunk
group by dialling its directory number (DN). This selection
should be turned OFF when using LCR.
Allows all keysets to be used in the speakerphone mode.
Allows a short burst of ring tone to indicate another call.
When the station is set for no C.O. calls to and from this
station, the station will not print on SMDR. This includes
transferred calls or calls picked up from hold or park.
When this feature is set to ON, a warning tone will be
heard each time LCR advances to the next route.
When this feature is set to ON, it allows calls to be
forwarded to voice mail.
Allows print out station to station call.
Set FWD No Ans. Destination in MMC 102 but do not
enable the feature (alternatively use code 603 + stn no.
then 600 to cancel the feature), when a call is presented
to this station and the Forward no answer timer expires,
the call will overflow to the station set as the Forward no
answer destination.
Press TRSF 300
Display shows
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
MMC 300 (Page 1 of 2)
Programming
February, 1999
DISPLAY
[201] CUS.ON/OFF
ACCESS DIAL :ON