Brocade Communications Systems WFT-2D User Manual page 346

7
Monitoring and Alerting Policy Suite widgets
•
•
Customizing the Out of Range Violations widget
You can customize the widget to display violations for a specific fabric or group and time frame.
•
•
•
Accessing additional data from the widget
•
•
•
•
294
Network Object Count — The number and network object type (such as switch, virtual machine,
port, trunk, and so on) with a MAPS and Fabric Watch violation for each category. Always
displays whether or not there is a violation.
NOTE
For FCIP Health, the Network Object Count is based on the number of VE_port and circuit
combinations with a MAPS violation. For example, if switch A and switch B are connected
through one circuit, and both switch A and switch B report a violation, the Network Object
Count is 2, because the circuit on switch A is considered to be on a different network object
than the circuit on switch B.
Refreshed — The time of the last update for the widget.
To display data for a specific fabric or group, refer to
page 275.
To display data for a specific duration, refer to
Sort the contents by clicking the column header. Click the same column header again to
reverse the sort order.
Right-click any row and select Violations to navigate to the Violations dialog box.
Double-click the Port Health category row (or right-click and select Port Health Violations) to
navigate to the Port Health Violations widget. For more information, refer to
Violations widget" on page 295.
Double-click the Virtual Machine Violations category row to navigate to the VM Alarms widget.
For more information, refer to the
Double-click any category row, other than Port Health and Virtual Machine Violations, to
navigate to the Violations dialog box.
"Creating a customized network scope"
"Customizing the time scope"
"VM Alarms widget" on page 291.
Brocade Network Advisor SAN User Manual
on
on page 278.
"Port Health
53-1003154-01