Hotdesking With Cti - NEC Univerge sv9100 Installation Manual

Hotdesking with CTI

It is possible to hotdesk on DT700/800, Softphone when 1 or 3 party CTI connections are
st rd
established.
If Hotdesking is performed the terminal will display:
By default CTI Override is disabled. It can be enabled on a per extension basis using
Programming Command 15-05-39 Override mode for CTI"
Once enabled if a hotdesking attempt is made it will override the extension that is currently
using that extension number successfully.
Important: This feature can only work correctly with phones of the same type and number of
keys. Hotdesking different phone types will cause errors and cannot be supported.