Dial Number Preview; Direct Inward Line - NEC DS1000 Product Description

Section 3: Features

Dial Number Preview

Direct Inward Line

40 Section 3: Features
Dial Number Preview helps
the user avoid dialing
errors.
Feature Quick Steps
To dial using Dial Number Preview:
1. Do not lift the handset, or press SPK or press ICM + Dial *.
2. Dial the number you want to call + Press line key to dial previewed number.
To correct the displayed digits before dialing them out:
1. Use VOL and VOL
VOL moves the cursor to the left. VOL
2. Dial the digit that you want to replace the cursor.
3. Press VOL and VOL
OR
Press VOL until the entire number displays to the left of the cursor.
The system will only dial the digits to the left of the cursor.
4. Press a line key.
A DIL lets an employee
know which calls are just for
them.
International Sales Information. When outside callers dial the DIL's phone number, the call rings
the operator on the International Sales line key. The DIL does not ring other extensions.
Assigning a DIL to an extension automatically provides immediate ringing and incoming access for
the trunk, with no additional programming required.
The extension to which the trunk is terminated controls the night mode of the trunk. For example, if
extension 301 has trunk 1 assigned as a DIL, the user can press DND to switch trunk 1 to its night
routing destination. Switching trunk 1 to night mode at extension 301 has no affect on the night
mode of the system. This flexibility could allow a service dispatcher with several DILs to indepen-
dently send trunks to their night destinations without affecting the night mode of the entire system.
A DIL can ring:
An extension number (including the attendant's extension)
A Ring Group master number
A UCD Group master number (including the Voice Mail master number)
Availability: All versions.
Dialing Number Preview lets a display keyset user dial and
review a number before the system dials it out.
until the cursor replaces the digit you want to change.
to place the cursor over any other digits you want to edit.
Availability: All versions.
A Direct Inward Line (DIL) is a trunk that directly rings an
extension, Ring Group master number, or UCD Group master
number (including Voice Mail). Since DILs only ring one exten-
sion, employees always know which calls are for them. For
example, a company operator can have a Direct Inward Line for
moves the cursor to the right.
DS1000/2000 Product Description