Maintenance Procedure (Periodical Check Parts); Replacing The Tray 1 Paper Take-Up Roller; Replacing The Tray 1 Separation Roller Assy - Konica Minolta bizhub C450 Service Manual

3. Periodical check
3.5

Maintenance procedure (Periodical check parts)

NOTE
• The alcohol described in the cleaning procedure of Maintenance represents the
isopropyl alcohol.
3.5.1

Replacing the Tray 1 Paper Take-up Roller

[3]
[1]
[4]
3.5.2

Replacing the Tray 1 Separation Roller Assy

[2]
14
[2]
4037F2C002DB
[6]
[5]
4037F2C003DB
[1]
4036fs2013c1
Field Service Ver. 1.0 Mar. 2005
1. Slide out the Tray 1.
2. Lock the Paper Lifting Plate [1] into
position.
3. Snap off the C-clip [2] from the Tray 1
Paper Take-Up Roller Assy [3].
4. Remove the shaft for the Tray 1
Paper Take-up Roller Assy [3] from
the front Bushing.
5. Snap off the C-clip [4], one collar [5]
and remove the Tray 1 Paper Take-
Up Roller [6].
6. To reinstall, reverse the order of
removal.
7. Select "Service Mode"→ "Counter"
→ "Life" and clear the count of "1st."
NOTE
• Replace the Tray 1 Paper Take-up
Roller and Tray 1 Separation Roller
at the same time.
1. Slide out the Tray 1.
2. Remove two screws [1] and the Tray
1 Separation Roller mounting
bracket Assy [2].