Sensor Check; Check Procedure; Sensor Check List; Sensor Check Screen - Konica Minolta bizhub C450 Service Manual

5. Sensor check

5. Sensor check
5.1

Check procedure

• To allow sensors to be checked for operation easily and safely, data applied to the IC on
the board can be checked on the panel with the main unit in the standby state (including
a misfeed, malfunction, and closure failure condition).
<Procedure>
1. Set the mode to the Service Mode.
☞ For details of how to display the Service Mode screen, see the Adjustment/Setting of
the main unit service manual.
2. Touch the "State Confirmation" key.
3. Touch the "Sensor Check" key.
5.2

Sensor check list

5.2.1

Sensor check screen

• This is only typical screen which may be different from what are shown on each individ-
ual main unit.
5.2.2 Sensor check list
A. Sensor monitor 2
Symbol Panel display
PI2-DU Set
PI1-DU Paperpassage 1
PC1-DU Paperpassage 2
8
Part/Signal name
Duplex Unit Door Set Sensor
Duplex Unit Transport Sensor 1
Duplex Unit Transport Sensor 2
Field Service Ver. 1.0 Mar. 2005
4535F3E504DA
Operation characteris-
tics/Panel display
1
OPEN
Paper Paper not
present
Paper Paper not
present
0
CLOSE
present
present