Konica Minolta bizhub C450 Service Manual page 293

10. Service Mode
C. Detail Setting
(1) Machine Setting
Functions • Execute the primary setting.
Use • Use to change the set contents.
• Use to register the machine to the CS Remote Care Center.
Setting/ 1. Call the Service Mode to the screen.
Procedure 2. Touch "CS Remote Care."
3. Touching the "Detail Setting" will display the primary setting.
Primary Setting
• Set the Center ID, Device ID, and the phone No.
• When the system is selected to E-Mail, the phone No. will be the mail address.
* When entering the phone No, 10-Keys and keys on the screen have following mean-
ings.
[-] Pose
[W] Wait
[T] Tone dial : Carry out tone dialing
[P] Pulse dial : Carry out pulse dialing
[*],[#]
Initial Transmission
• Touching the Initial Transmission key will sent the information to the CS Remote Care
Center to register the machine.
(Only when the Modem or Fax is selected on the system Input.)
(2) Date/Time Input
Functions • To set the data and time-of-day
Use • Use to set or change the date and time-of-day.
Setting/ 1. Call the Service Mode to the screen.
Procedure 2. Touch "CS Remote Care."
3. Touch "Detail Setting" to access Date/Time Input.
4. Enter the date (month, day and year), time-of-day, and the time zone from the 10-
Key Pad.
5. Touch "SET" to start the clock.
(3) RAM Clear
Functions • To clear the following data at the Center
ID Code, Primary Setting, Date/Time Input, and Common DT.
Use • To be used for resetting CS Remote Care.
• Use to clear various types of data of the Center.
Setting/ • The default setting is "Disable."
Procedure
256
: Waits to start transmitting after dialing
: Detects the dial tone of the other end
: To be used as necessary
Enable
Field Service Ver. 1.0 Mar. 2005
"Disable"