10. Service Mode
B. System Error Clear
Functions
• To reset the trouble data.
Use
• Use to clear the "Jam", "Trouble", "Error" displays, and other improper displays.
☞
For details on items to be cleared, see page 299 "Contents to be cleared by Reset
function."
Setting/Pro-
1. Call the Service Mode on the screen.
cedure
2. Select the key as follows.
"System 1" → "Initialization" → "System Error Clear."
3. Press the Start key.
4. When "OK" is displayed, turn the main power switch OFF, and ON again.
10.8.8
Install Date
Functions
• To register the date the main unit was installed.
Use
• Upon setup.
Setting/
1. Call the Service Mode on the screen.
Procedure
2. Select the key as follows.
"System 1" → "Install Date."
3. Enter the date (Year 4 digit → Month 2 digit → date 2 digit) from the 10-Key Pad.
4. Touch "Entry" key to set the date of installation.
10.9 System 2
10.9.1
HDD
Functions
Use
• Not Used.
Setting/Pro-
cedure
262
Field Service Ver. 1.0 Mar. 2005