Konica Minolta bizhub C450 Service Manual page 69

3. Periodical check
NOTE
• When installing the Imaging Unit, ensure that the color of the mounting guide of
the Imaging Unit is the same as the color of the label at the mounting position on
the main unit.
32
B. Reinstallation Procedure
1. Remove the Imaging Unit from its
plastic bag.
2. Tilt the Imaging Unit [1] to the left
and shake it a small stroke in the tilt
direction twice. Then, tilt it to the
[1]
right and shake it a small stroke in
the tilt direction twice.
4036fs2580c0
NOTE
• Since the Imaging Unit is highly
susceptible to light, keep it
shielded from light up to the time it
is installed.
• Carefully unseal the plastic bag
(black).
• If the Imaging Unit is packed in the
plastic bag (black) again, seal the
package using tape or another
means.
3. Keeping the Imaging Unit [2] in a
level position, insert the Imaging Unit
[2] into the mounting position all the
way until it is stopped.
NOTE
• Do not allow the Imaging Unit to
become tilted while installing them
into the Main Unit, as damage to the
[2]
PC Drum or the LED assembly can
result.
• Insert the Imaging Unit until a click
is heard.
4036fs2581c0
Field Service Ver. 1.0 Mar. 2005