Printer Setting - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
8.5.6

Printer Setting

A. Basic Setting
(1) PDL Setting
Functions • To set the PDL (Page Description Laguage) for PC printing.
Use • To fix the PDL as necessary. It usually switches automatically.
Setting/ • The default setting is Auto.
Procedure
(2) Number of Sets
Functions • To set the number to be copied when not specified by the printer driver during PC
printing.
Use • To use when the number cannot be specified by the printer driver during printing from
Windows DOS, etc.
Setting/ • The default setting is 1.
Procedure
(3) Original Direction
Functions
• To set the default setting for the direction of the original during PC printing.
Use
Setting/ • The default setting is Portrait.
Procedure
(4) Spool Print Jobs in HDD before RIP
Functions
• To set whether to store the print data to HDD when receiving the next job during Rip
process of the current job.
Use
Setting/ • The default setting is OFF.
Procedure
(5) A4/A3 ↔ LTR/LGR Auto Switch
Functions • To set whether to switch between A4 and Letter size paper, and A3 and Ledger size
paper in reading.
Use • To output Letter size document to A4 size, and Ledger size document to A3 size.
• To output A4 size document to Letter size, and A3 size document to Ledger size.
NOTE
• When switching the size, the image will be printed in the same magnification.
• The image will not be reduced when there is image deficiency.
Setting/ • The default setting is OFF.
Procedure
"Auto" PCL
"1" (1 to 999)
"Portrait"
ON
ON
8. Utility Mode
PS
Landscape
"OFF"
"OFF"
161