Replacing The Paper Take-Up Roller - Konica Minolta bizhub C450 Service Manual

2. Periodical check
NOTES
• Install the Separation Roller Assy while pressing the holder down so that it aligns
to the metal bracket of the machine.
• Make sure that the Separation Roller Assy is not tilted to the right or left when
installed.
NOTE
• Replace the Separation Roller Assy, Paper Take-up Roller and Pick-up Roller at the
same time.
2.1.2

Replacing the Paper Take-up Roller

[4]
[5]
4
[1]
4348F2C502DA
[3]
[2]
[2]
[2]
4348fs2603c0
[4]
4348fs2604c0
Field Service Ver. 1.0 Mar. 2005
1. Remove the Rear Right Cover.
(Remove the Right Lower Cover for
4th row.)
☞ 10
2. Remove the Tray3.(Remove the
Tray4 from 4th row.)
3. Remove the Paper Separation Roller
Mounting Bracket Assy.
☞ 3
4. Disconnect the connector [1] and
remove the harness from two wire
saddles.
5. Remove four screws [2] and remove
the Paper Take-up Unit [3].
6. Remove two screws [4] and remove
the Mounting Frame [5] for the Paper
Separation Roller Mounting Bracket
Assy.
4348fs2623c0