Konica Minolta bizhub C450 Service Manual page 252

Field Service Ver. 1.0 Mar. 2005
(3) Print Data Capture
Functions • To set whether to allow or restrict capturing the Print Job Data.
• To be used when carrying out Service Mode → System 2 → Data capture.
Use
Setting/ • The default setting is Allow.
Procedure
E. HDD Setting
(1) Check HDD Capacity
Functions • To display the used space capacity, total space capacity, and the remaining capacity
of the hard disk.
Use • To check the capacity and the status of use of the hard disk
(2) Delete Unused User Box
Functions
• To delete the unnecessary box without data.
Use
Setting/ 1. Touch "Delete Unused User Box" key.
Procedure 2. Touch "Yes" key on the Check screen.
(3) Delete Secure Documents
Functions
• To delete the whole classified documents in the hard disk.
Use
Setting/ 1. Touch "Delete Secure Documents" key.
Procedure 2. Touch "Yes" key on the Check screen.
(4) Overwrite All Data
Functions
• To delete the whole data in the hard disk by overwriting.
Use
Setting/ 1. Touch "Overwrite All Data" key.
Procedure 2. Touch "Overwrite" key.
3. Touch the "Yes" key on the Check screen.
(5) HDD Lock Password
Functions • To set the Lock Password for the hard disk.
Use • To enter the Lock Password for the hard disk.
Setting/ 1. Touch "HDD Lock Password" key.
Procedure 2. Enter the password (up to 20 on-byte characters) on the on-screen keyboard, and
touch "OK" key.
3. Reenter the password to confirm.
4. Turn main power switch OFF and ON again.
"Allow"
8. Utility Mode
Restrict
215