Replacing The Bypass Tray Separation Roller Assy; Replacing The Tray 2 Separation Roller - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
3.5.4

Replacing the Bypass Tray Separation Roller Assy

[1]
[5]
[3]
[6]
3.5.5

Replacing the Tray 2 Separation Roller

[2]
[3]
1. Remove the Multi Bypass Unit.
☞ 76
[2]
2. Remove two screws [1], and remove
4037F2C515DA
3. Snap off the C-clip [3], and remove
4. To reinstall, reverse the order of
5. Select "Service Mode" → "Counter"
NOTE
[4]
• Replace the Bypass Paper Take-up
4037F2C522DA
1. Slide out the Tray 2.
2. Remove the Multi Bypass unit.
3. Remove the Screw [1], and the Rein-
[1]
4036fs2018c0
4. Open the Vertical transport door.
5. Remove two Claws [3] and the Verti-
[4]
4036fs2019c0
3. Periodical check
Bypass Paper Separation Roller fix-
ing bracket Assy [2].
the spring [4] and the guide plate [5].
Remove the Bypass Paper Separa-
tion Roller Assy [6].
removal.
→ "Life" and clear the count of "Man-
ual Tray."
Roller and the Bypass Separation
Roller Assy at the same time.
forcement plate [2].
cal transport door [4].
17