Konica Minolta bizhub C450 Service Manual page 219

8. Utility Mode
<Centering Auto Adjustment>
Functions • Adjust the start position for image scanning
Use • Upon setup of the ADF
Setting/
☞
See Automatic Document Feeder Service Manual.
Procedure
<Auto Adj. of Stop Position: Front>
Functions • Adjust the document stop position for the first side.
• Check for skew.
Use • Upon setup of the ADF
Setting/
☞
See Automatic Document Feeder Service Manual.
Procedure
<Auto Adj. of Stop Position: Back>
Functions • Adjust the document stop position for the second side.
Use • Upon setup of the ADF
Setting/
☞
See Automatic Document Feeder Service Manual.
Procedure
H. List/Counter
(1) Management List
Functions
• To output the value set by the setting menu.
Use
Setting/ 1. Touch "Job Settings List" key.
Procedure 2. Select the Paper Take-up tray and press the Start key.
(2) Paper Size/Type Count
Functions
• To register the combination of the specific paper size and the paper type, and to set
the count.
Use
Setting/ 1. Press a key out of 1 to 10 registration keys.
Procedure 2. Select the paper type.
3. Touch the paper size key to select the paper size.
I. Standard Size Setting
(1) Original Glass Original Size Detect
Functions • To change the document size detection table.
Use • Use to change the setting for the document size detection table.
Setting/ • The default setting is "Table1."
Procedure
182
"Table1"
Field Service Ver. 1.0 Mar. 2005
Table2