User Setting; System Setting - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
8.5

User Setting

8.5.1

System Setting

A. Language Selection
Functions • To select the language on the LCD display
Use • To change the language on the control panel to another language.
Setting/ • The language options depend on the marketing area selected in "Marketing Area"
Procedure available from "System 1" under Service Mode.
B. Measurement Unit Setting
Functions • To select the unit displayed on the LCD display.
Use • To change the unit displayed on the control panel.
Setting/ • The default setting varies depending on the marketing area
Procedure
mm (Numerical Value)
C. Paper Tray Setting
(1) Auto Tray Select Setting
Functions • To set the Tray for automatic selection when APS is being set.
• To establish the priority for switching the Tray when ATS is being set.
Use • To specify the Tray to be used when APS is being set.
• To establish the priority of the Tray when ATS is being set.
Setting/ • Select the Tray on the Auto Tray Select screen.
Procedure • Set the priority on the Tray priority screen.
(2) Auto Tray Switch ON/OFF
Functions • To set whether to automatically switch to another Tray with same size paper when the
Paper Take-up Tray runs out of paper during printing.
Use • To switch the Paper Take-up Tray automatically.
Setting/ • The default setting is Restrict.
Procedure
(3) No Matching Paper in Tray Setting
Functions • To set whether to switch to another Tray automatically when the specified Tray runs
out of paper during printing.
Use
Stop Printing (Tray Fixed) : It stops printing when the specified Tray runs out of
Switch Trays (Tray Priority): To switch to another Tray with the specified paper and
Setting/ • The default setting is Stop Printing (Tray Fixed).
Procedure
"Stop Printing (Tray Fixed)"
inch (Numerical Value)
Allow
paper.
print when the Tray is out of paper
Switch Trays (Tray Priority)
8. Utility Mode
inch (Fraction)
"Restrict"
153