Konica Minolta bizhub C450 Service Manual page 200

Field Service Ver. 1.0 Mar. 2005
(6) Hole-Punch
Functions • To select whether to make punch-holes or not when not specified by the printer driver
during PC printing.
Use • To use when the printer driver cannot specify punching during printing from Windows
DOS, etc.
Setting/ • The default setting is OFF.
Procedure
C. PCL Setting
(1) Typeface
Functions • To set the font when not specified by the printer driver during PC printing.
Use • To use when the printer driver cannot specify the font during printing from Windows
DOS, etc.
Setting/
• The default setting is Courier.
Procedure
(2) Symbol Set
Functions • To set the Font Symbol Set when not specified by the printer driver during PC print-
ing.
Use • To use when the Font Symbol Set cannot be specified by the printer driver during
printing from Windows DOS, etc.
Setting/
• The default setting is Roman-8 or PC8, Code Page 437.
Procedure
(3) Font Size
Functions • To set the font size when not specified by the printer driver during PC printing.
Use • To set the font size when it cannot be specified by the printer driver during printing
from Windows DOS, etc.
Setting/ • The default setting is
Procedure Scalable Font : 12.00 points
Bitmap Font
(4) Line/Page
Functions • To set the number of lines per page for printing the text data.
Use • To change the number of lines per page for printing the text data.
Setting/ • The default setting is 60 or 64 lines.
Procedure
ON
: 10.00 points
"60 or 64 lines" (5 to 128)
8. Utility Mode
"OFF"
163