Replacing The Pick-Up Roller - Konica Minolta bizhub C450 Service Manual

2. Periodical check
[15]
[13]
NOTE
• Replace the Separation Roller Assy, Paper Take-up Roller and Pick-up Roller at the
same time.
2.1.3

Replacing the Pick-up Roller

[2]
6
[13]
[14]
4348fs2507c0
[16]
[17]
4348fs2508c0
[1]
4348F2C501DA
[3]
[2]
[2]
4348fs2502c0
Field Service Ver. 1.0 Mar. 2005
11. Remove two E-rings [13] and the
bushing [14], and remove the Pick-
up Roller Fixing Bracket Assy [15].
12. Remove the C-ring [16] and remove
the Paper Take-up Roller [17].
1. Remove the Rear Cover and the
Rear Right Cover.
☞ 10
2. Remove the Tray3.
3. Remove the Paper Separation Roller
Mounting Bracket Assy.
☞ See the procedures 1 to 2 in page 3
"Separation Roller Assy."
4. Disconnect the connector [1] from
the Main Control Board.
5. Remove four screws [2] and remove
the Paper Take-up Unit [3].