Adjustment Of The Lower Entrance Motor (M2-Fn) Timing Belt; Adjustment Of The Exit Motor (M3-Fn) Timing Belt - Konica Minolta bizhub C450 Service Manual

5. Mechanical adjustment
5.3.2

Adjustment of the Lower Entrance Motor (M2-FN) Timing Belt

[2]
[1]
5.3.3

Adjustment of the Exit Motor (M3-FN) Timing Belt

[1]
[1]
16
1. Loosen two screws [1].
2. Move the mounting bracket [2] and,
[1]
4684fs2506c0
1. Loosen three screws [1].
[1]
2. Tighten three screws [1] so that the
[2]
4684fs2507c0
Field Service Ver. 1.0 Mar. 2005
when the belt deflects 2 mm at C,
tighten two screws [1].
distance D between the upper end
face of the head of screws [1] and
the upper end face of the slot in the
mounting bracket [2] measures
about 0.5 mm.