Konica Minolta bizhub C450 Service Manual page 126

Field Service Ver. 1.0 Mar. 2005
[9]
[12]
[14]
[6]
4036fs2561c0
[7]
[8]
[10]
4036fs2562c0
[13]
[11]
0.1 mm
4036fs2563c0
[15]
[15]
[14]
4036fs2564c0
8. Slip the Cable Holding Jig [6] onto
the pulley to secure the cable in posi-
tion.
9. Install the front and rear pulleys [7]
and bushings [8] onto the shaft [9]
and fit the C-clip [10].
10. Mount the Scanner drive gear [11]
on the shaft [12] and secure it using
the screw [13].
NOTE
• Allow a clearance of about 0.1 mm
between the Scanner drive gear and
bushing.
11. Secure the front and rear pulleys [14]
using the screw [15] each.
NOTE
• Apply the Screw lock on the Screw.
6. Other
89