Field Service Ver. 1.0 Mar. 2005
Cautions in replacing the Control Board:
• When Control Board (PWB-MC) is replaced, relocate the Parameter Chip (IC40).
Mount the Parameter Chip (IC40) of old Control Board onto the new Control Board.
6.3.20
Slide Interface Board (PWB-SIF)
[1]
A
A
4037F2C534DA
[2]
[1]
4037F2C054DA
NOTE
• When the Parameter Chip (IC40) is
mounted, precisely fit the direc-
tions of each "A".
1. Remove the PWB Box.
☞ 93
2. Remove seven screws [1] and the
Board Unit [2].
6. Other
4037F2C053DB
67