Tcr Sensor Y/M/C (Pwb-N1/-N2/-N3) - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
[16]
6.3.55

TCR Sensor Y/M/C (PWB-N1/-N2/-N3)

[1]
11. Press the LPH Assy [16] down into
the locked position.
NOTE
• Select "Service Mode"
"Machine"
change the value of "LPH Rank" to
"1".
• When the LPH Unit has been rein-
stalled, be sure to run "Stabilizer"
available from "Image Process
Adjustment" of the Service Mode.
4036fs2633c0
1. Remove the LPH Unit.
[3]
☞ 79
2. Remove two screws [1], unplug the
connector [2], and remove the TCR
[2]
Sensor.
NOTE
• When the TCR Sensor has been
reinstalled, be sure to run "Stabi-
4036fs2544c0
lizer" available from "Image Pro-
cess Adjustment" of the Service
Mode.
6. Other
→
→
"LPH Rank" and
119