6. Mechanical adjustment
7. Make sure that Result is "OK." Then, touch "SET."
8. Touch "END."
9. Touch "Exit" on the Service Mode screen.
If the Result is "NG":
• Check and correct the skew of the document.
• Manually correct the value of "1-Sided Set."
6.4.2
Auto adjust: Sub Scanning Direction 2-Side
A. Adjustment procedure
1. Call the Service Mode to the screen.
2. Touch "ADF."
3. Touch "Auto Stop Position Adjustment."
4. Touch "Sub Scanning Direction 2-Side."
7. Check that Result is "OK" and then touch "SET."
8. Touch "END."
9. Touch "Exit" on the Service Mode screen.
If the Result is "NG":
• Check and correct the skew of the document.
• Manually correct the value of "2-Sided Set."
24
5. Place the chart furnished with the
[1]
NOTE
• Make sure that the blank surface of
the chart faces up.
6. Press the "Start key."
4582fs3508c0
Field Service Ver. 1.0 Mar. 2005
Document Feeder [1] in the docu-
ment feeding tray.
4037F3E529DA