Konica Minolta bizhub C450 Service Manual page 203

8. Utility Mode
B. Output Setting
(1) Print/Fax Output Settings
Functions • To set the timing for printing for the PC print job or Fax received.
Use Batch Print : Starts printing when all data are received
Page Print : Starts printing every time data for each page are received
Setting/ <Printer>
Procedure • The default setting is Page Print.
<Fax>
• The default setting is Batch Print.
(2) Exit Tray Setting
Functions • To set the priority output tray for each application (Copy print, Printer, Fax and Print
Reports).
* This setting is available only when FS-507 is mounted.
Use • To change the output tray according to the application.
Setting/ • The default settings are as follows.
Procedure Copy
Print
Fax
Reports : 3
C. Date/Time Setting
Functions • To set the date/time and the time zone to start the clock.
Use • To change settings concerning the date/time.
• This setting should be carried out for set up.
Setting/ • For time zone, set the time difference with the world standard time.
Procedure • Setting range for the time zone: -12:00 to +12:00 (by 30 minutes)
D. Daylight Saving Time Setting
Functions • To set whether to set the daylight saving time.
• To set the time difference in setting the daylight saving time.
Use • To set the daylight saving time.
Setting/ • The default setting is OFF.
Procedure
• When setting to ON, set the time difference to move up.
E. Weekly Timer Setting
(1) Weekly Timer ON/OFF Setting
Functions • To set whether to use or not to use the Weekly Timer.
Use • To set the Weekly Timer.
Setting/ • The default setting is OFF.
Procedure
166
: 2
: 2
: 3
ON
"60 min." (1 to 150)
ON
Field Service Ver. 1.0 Mar. 2005
"OFF"
"OFF"