Service Mode; Service Mode Setting Procedure; Adf Setting Procedure; Original Stop Position - Konica Minolta bizhub C450 Service Manual

5. Service Mode

5. Service Mode
5.1

Service Mode setting procedure

☞ For details of how to display the Service Mode screen, see the Adjustment/Setting of
the main unit service manual.
5.2

ADF setting procedure

5.2.1

Original Stop Position

Functions • To make a manual adjustment of the document stop position and scanning position in
each of the ADF modes.
Use • When "Auto Adjust Stop Position" is NG.
Setting/
☞
26
Procedure
5.2.2

Registration Loop Adj.

Functions • To adjust the length of the loop to be formed in paper before the Registration Rollers.
Use • When a document misfeed or skew occurs.
Setting/
☞
28
Procedure
5.2.3

Auto Stop Position Adjustment

A. Sub Scanning Direction 1-Side
Functions • Adjust the document stop position for the first side.
• Check for skew.
Use • Upon replacement of the ADF
Setting/
☞
23
Procedure
B. Sub Scanning Direction 2-Side
Functions • Adjust the document stop position for the second side.
Use • Upon replacement of the ADF
Setting/
☞
24
Procedure
C. Main Scanning Direction
Functions • Adjust the start position for image scanning
Use • Upon replacement of the ADF
Setting/
☞
25
Procedure
16
Field Service Ver. 1.0 Mar. 2005