Konica Minolta bizhub C450 Service Manual page 120

Field Service Ver. 1.0 Mar. 2005
[4]
[7]
[8]
[6]
[5]
[4]
[4]
4036fs2523c0
[9]
4036fs2524c1
[1] [3]
[2]
4036fs2525c0
6. Remove three screws [4] and the
Scanner Motor Assy [5].
7. Remove two screws [6], set screw
[7], damper [8] and the Scanner
Motor [9].
B. Reinstallation Procedure
1. Temporarily secure the Scanner
Motor Assy [2] using three screws
[1].
2. Hook the spring [3].
3. With the Scanner drive gear set
screw located on the right-hand side
as shown on the left, slide the Scan-
ner Motor Assy to the left and check
that it is returned to the original posi-
tion by the tension of the spring. Per-
form this step three times.
4. Securely tighten the three screws to
fix the Scanner Motor Assy [2] into
position.
6. Other
83