Connections For Cut Editing - Sony PDW-HD1500 Operation Manual

Settings on this unit
Remote control switch: NET (see page 15)
Setup menu item 257 NETWORK ENABLE: net
Connecting three PDW-HD1500 units to a laptop
computer via a LAN.
PDW-HD1500
LAN
To (network)
connector
Settings on all PDW-HD1500
Remote control switch: NET (see page 15)
Setup menu item 257 NETWORK ENABLE: net

Connections for cut editing

The following figure shows a cut editing system
comprising this unit as a player.
When making the connections, also refer to the manuals
provided with the equipment to be connected.
See page 32 for more information about editing control
unit settings.
When using an editing control unit
Using BVE-700/700A
The following figure shows a cut editing system
comprising this unit as a player, an HDW-M2000/M2000P
unit as a recorder, and a BVE-700A as an editing control
unit.
Laptop computer
Network cable
(not supplied)
Using the S400 (i.LINK) connector (FAM
connection)
The following shows an example of a FAM (file access
mode) connection.
Note
The PDZ-1 Proxy Browsing Software must be installed in
advance.
The required FAM driver is also installed when you install
the PDZ-1 software.
See "Using PDZ-1 Proxy Browsing Software" (page 121)
for more information about installing the PDZ-1 software.
Some limitations apply to FAM connections. For details,
see "File Access Mode File Operations" (page 78).
PDW-HD1500 (this unit)
To S400 connector
i.LINK cable (not supplied)
Laptop computer
31
Connections and Settings