Sony PDW-HD1500 Operation Manual page 114

Alarm message in time
data display section
b)
No SEL List
a)
No SUB CLIP
b)
SB CLP mode
b)
SUB CLIP NG
b)
No List!
b)
STOP ONCE!
No EM space
EM Full!
Disc Damage
NON-AV Full
Index File!
File System
a)
Loading!
a)
Unloading!
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on".
b) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on" or "limit".
114
Troubleshooting
Alarm message in monitor video
section
CLIP LIST IS NOT SELECTED.
CLIP LIST CANNOT LOCATE SPECIFIED
SUB CLIP(S).
TO ADD AN ESSENCE MARK, EXIT
FROM SUB CLIP MODE FIRST.
SUB CLIP IS INVALID.
SET APPROPRIATE IN/OUT POINTS.
NO CLIP LIST.
STOP ONCE, THEN EXECUTE.
ESSENCE MARK NOT RECORDED.
NO SPACE AVAILABLE TO RECORD
ESSENCE MARK.
NO MORE ESSENCE MARKS CAN BE
RECORDED.
DISC CANNOT BE RECORDED TO.
USE ANOTHER DISC FOR RECORDING.
DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING SPACE,
DELETE CLIPS OR NON-AV DATA.
(GENERAL FILES)
UNSUPPORT INDEX FILE.
DISC CANNOT BE RECORDED TO.
CURRENT VERSION OF THE
SOFTWARE SETS THE DISC WRITE
PROTECTED.
FILE SYSTEM ON THE DISC INHIBITS
WRITING.
LOADING.
UNLOADING.
Description/action
This appears when you press the SUB CLIP/
DISC MENU button while the clip list on the disc is
not loaded into the current clip list.
Load the clip list (see page 64) and try again.
This appears when a playback button is pressed with
no sub clips in the current clip list.
Playback is not possible when there are no sub clips
in the current clip list.
This appears when you perform essence mark
operations with the SUB CLIP/DISC MENU button lit.
Try again after pressing the SUB CLIP/DISC MENU
button to turn it off.
Set the In and Out points again.
This appears when you try to delete a clip list when
there is no clip list saved on the disc.
Load the disc that contains the clip list you want to
delete.
This appears when you press the SUB CLIP/DISC
MENU button during clip list playback.
Stop the playback and try again.
Use the PDZ-1 Proxy Browsing Software to delete
unneeded essence marks.
Delete unneeded shot marks in the chapter thumbnail
screen.
Use another disc.
Delete unneeded clips or GENERAL files.
Use another disc.
This appears when you insert a disc that can be
played back but not recorded.
Exchange the disc for one with a file system
supported by this unit. Or format the disc (see
page 69).
This appears if you press a button while a disc is
loading. Wait until the disc has finished loading and
try again.
This appears if you press a button while a disc is
unloading.
Wait until the disc has finished unloading and try
again.